Explore custom two car garage doors for homes and villas. This guide covers common size references, one wide door versus two single doors, finish and insulation options, and the measurements needed before ordering. Learn what to confirm with your local installer, then send GEORGE your drawings for a project-specific quote.
A two car garage door is usually one wide door serving two parking spaces. A 16 ft × 7 ft (4,877 × 2,134 mm) opening is a common North American reference, but the right size depends on the vehicles, the garage layout and the available installation space. GEORGE supplies made to order garage doors for overseas home projects; our team reviews drawings and product options before quoting. Local measurement and installation are arranged by the buyer with a qualified contractor.
The dimensions below are planning references, not a published size or performance rating for a particular GEORGE model. Final specifications belong in the approved product drawing and quotation.
| Planning item | Reference or available approach |
| Common double door opening | 16 ft × 7 ft (approximately 4,877 × 2,134 mm) is a common North American reference. |
| Other dimensions | Wider or taller doors may suit larger vehicles; GEORGE reviews custom sizes against the selected system and project drawing. |
| Appearance | Custom finishes and colors are offered; confirm the actual sample or finish code for the proposed door. |
| Insulation | Insulated panels are an option. Request the panel construction and tested value for the selected configuration. |
| Opening system and hardware | Select and document the door system, track, spring, opener compatibility and included hardware before approval. |
| Wind performance | Provide the project location and required design pressure. Confirm the proposed assembly against applicable local requirements and its supporting documents. |
| Supply and installation | GEORGE supplies and coordinates export of the custom product; a local contractor verifies site measurements and installs it. |
Start with the actual vehicles, including mirrors and roof accessories, then check the approach angle and usable space inside the garage. A taller door addresses vehicle height; a wider door addresses side clearance. Increasing the opening may also require structural work, so do not order a wider door solely from a vehicle measurement.
Ask your local installer to record the finished opening width and height, left and right side room, headroom above the opening, backroom toward the rear wall and any ceiling obstructions. The selected track and opener determine their exact clearance requirements.
One wide door creates an uninterrupted opening and a clean facade. Two individual doors can give each vehicle independent access, but they require a center support and separate door systems. The choice depends on the building structure, parking habits, exterior design and local installation plan. GEORGE can review your drawings and quote a suitable door configuration after the openings are confirmed.
Coordinate the garage door finish with the entrance door, windows and exterior materials while the elevations are still being finalized.
Check the real vehicle envelope and turning approach before selecting the width and height. A two car label alone does not guarantee comfortable parking.
Have your installer assess the existing opening, framing and clearances. GEORGE can review those measurements and reference photos for a made to order product quotation; local removal and installation are separate services.
GEORGE is a Foshan based supplier of custom doors and coordinated building materials for residential projects. Rather than choosing a preset retail SKU alone, you can submit the garage opening and exterior drawings for a product configuration review. If the project also needs windows or other doors, the team can coordinate dimensions and finishes across the order. Drawings are approved before production, followed by quality checks and export packing. These are supply process advantages; insulation, wind resistance and hardware quality must still be verified for the exact model quoted.
Explore the published GEORGE garage door product gallery :
https://www.georgewindowdoor.com/doors/garage-door
for current product views. Before you commit, request images of the proposed door face, panel edge, finish and hardware, plus the approved drawing and any performance documents required for your location. If you are comparing an installed project, ask which door system is shown and whether its configuration matches your quote.
A useful quotation specifies the opening size, selected door construction, finish, insulation, hardware, opener scope, quantity, packaging and shipping destination. Ask for the product supply price and the shipping basis to be shown clearly. Your local installer should separately confirm site preparation, removal, installation and any permit or structural work.
In North America, 16 ft wide by 7 ft high is a common double door reference. Other dimensions are available in the market, but the right choice depends on your opening and selected product.
It may work for some vehicles, but check both vehicles, mirrors, approach angle and parking space. A wider opening can improve access when space and structure permit.
Give GEORGE the project address and local design requirements. Request the wind load documentation for the exact proposed door assembly before ordering; a general product description is not a rating.
GEORGE supplies custom doors for export. A qualified local contractor should confirm final measurements and manage removal and installation at the property.
Send your opening dimensions, garage and facade photos, drawings, destination, preferred finish and any insulation or wind performance requirements. GEORGE can then review a proposed configuration and prepare a project specific quotation.
Clopay: Standard garage door sizes and measuring guidance
DASMA: Garage door technical data and wind load guidance
Whether you have detailed drawings or just an early idea, our team will help you plan windows, doors, and the complete building materials for your project.
Send us your product requirements, project information, drawings or reference images — we usually reply within one business day.
We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details